Technical specification of the Bartontech 800 PLUS horizontal baler with design changes intended for baling tires, foam and rubber. The machine is also able to bale paper or cardboard and other waste.

Technical parameters

TECHNICAL DATA:
– filling opening (height x width): 1850 mm x 950 mm
– bale dimensions: 1000 mm x 800 mm x 1000 – 1300 mm
– bale weight: 600 kg – 900 kg (depending on the material); foam: 300 kg
– binding: 3.5 mm (minimum diameter)
– number of wires: 9
– binding directions: horizontal and vertical (4×5)
– pressure: 210 bar
– pump size: 61 cc, 9 cc
– number of cylinders: 2 + 2 additional for ejecting the bale
– pressure: 50 tons
– engine speed: 1440 rpm
– standard cycle time: 15 kW / 70 s or 22 kW / 50 s
– current: 35A (15 kW motor)
– voltage: 415V
– internal electrical circuit: 24V DC
– hydraulic door opening and closing
– full bale sensor and machine jam sensor
– CE certificate

Possible additional equipment (to be chosen by the customer – the full list is available on request):
– oil cooler
– oil heater
– floor and walls of the ironing chamber, made of hard steel
– special wedges to prevent material from falling back
– control panel cover
– hour meter

[Best_Wordpress_Gallery id=”33″ gal_title=”800PLUS-2″]

Construction visualization.
The covers marked in blue in the drawing are available in two variants: with hydraulic or manual opening / closing.

1 year warranty. The machine is a Polish product.

If you have further questions, please contact us!